Our Aluminum Hold Downs, both large and small are perfect for holding work pieces extra tight.

The large hold down comes with a 3/8" standard hex head bolt and knob for use with our Heavy Duty T-Track.

The small hold down comes with a 1/4" standard hex head bolt for use with our Mini-T-Track

Add safety to your T-Track fence system with the addition of this toggle hold down. Finger tightened nuts allow you to position the 35 lb clamp anywhere along the track. Large 2" vertical adjustment of hold down foot.

• # 2987 Fits heavy duty T-Track accepting 9/16" wide fasteners (3/8" bolt size).
• # 2988 Fits mini T-Track accepting 7/16" wide fasteners (1/4" bolt size).

Our T-track rollers can be used on your drill press, router table and more! The rollers slide into standard size T-track (1/4" x 20 or 3/8" x 16) and are secured with knob. The hardened rubber wheels contain bearings inside so they rotate freely which in turn allows you to feed your stock through without sticking or moving outward from your fence.

These t-track hold down clamps are designed to work with our T - track opening for either 3/8" or 1/4" sizes. The bottom of the clamp slides neatly into your t-track slot, and is adjustable to anywhere along the track. The clamp is fitted with a 2-3/8” brass foot for excellent holding power. The clamping capacity is approx. 2-1/8”. This package is available in packs of two in 1/4” or 3/8"sizes. T-track not included.

Ratchet Knobs

This high quality knob can be used for shop made jigs or replacement for that lost knob. Thread inserts are steel for long life.

Star Knobs and Bolts

This high quality knob can be used for shop made jigs or replacement for that lost knob. Thread inserts are steel for long life.

Post Knob

This high quality knob can be used for shop made jigs or replacement for that lost knob. Thread inserts are steel for long life.

Thru Knob With Thru Hole

This high quality knob can be used for shop made jigs or replacement for that lost knob. Thread inserts are steel for long life.

Round Knob w/2" Stud

This high quality knob can be used for shop made jigs or replacement for that lost knob. Thread inserts are steel for long life.

T- Knob

Use these tall knobs to secure a router table fence, bandsaw fence and more. The tall knobs allow for easy adjustment,especially where reach may be an issue. The knobs are 4" long and have 1/4" x 20 threads.

UHMW Jig Miter Bar

Use this UHMW Jig Bar to build sliding jigs for the table saw, drill press, band saw or any place you use a miter gauge. Slides easy. Can be drilled and tapped.

The perfect accessory kit for attaching featherboard, hold-downs or virtually any type of jig you can think of to your table saw, router table, or any tool with a standard 3/4" x 3/8" miter gauge slot. The fixture kit works by applying outward pressure to the "walls" of the miter gauge slot. The "wedge" bolts push up into center counter sunk holes in the miter bar as they tighten with the star knobs, which pushes the center of the miter bar outward producing a nice tight fit.

The Fixture Kit includes:

• 2 ea. expandable 4 3/4" long miter bars
• 2 ea. star knobs
• 2 ea. wedge bolts
• 2 ea. washers
• can be used with stock up to 1-1/4" thick

Our compact, Universal Fence Clamps allow you to secure a variety of shop made auxiliary fences to your existing table top fences without having the clamp block your work. The clamp arm simply fits into a 3/8” hole in the top of the auxiliary fence, keeping the clamp out your way. That simply means no more cumbersome wood screws or C clamps, and no need to screw into your expensive fence! Works great for table saws, band saws, cutoff saws, router fences. Clamps come in sets of 2.

Finally a universal Precision Miter Bar for building virtually any sled or miter slot jig. With adjustable spring plungers, the miter bar maintains constant pressure against the walls of the miter slot so you have virtually no play side to side, while being able to slide through the slot with ease. The bar fits most standard 3/4” x 3/8” miter slots.
Made of hardened steel the Precision Miter Bar will not bend or twist like some of the plastic bars you may have. This is the perfect accessory for anyone who likes to build their own jigs and fixtures and who is concerned with quality.

Flip Stop

This all aluminum stop will put your cuts right on the money time after time. Flips out of the way if you need to make an odd cut in the middle of a run.

These self adhesive Mylar measuring tapes are great for jigs and fixtures or to replace an old worn factory tape on your shop equipment.

These Tapes measure in 16th increments with the graduation marks to the top and the inch marks to the bottom. Tapes are yellow with black print.

Right Reading Measuring Tape reads from the zero mark to the right as the measure increases.

These self adhesive Mylar measuring tapes are great for jigs and fixtures or to replace an old worn factory tape on your shop equipment.

These Tapes measure in 16th increments with the graduation marks to the top and the inch marks to the bottom. Tapes are yellow with black print.

Left Reading Measuring Tape reads from the zero mark to the left as the measure increases.

These very accurate, self-stick steel measuring tapes mount directly to your fence and feature high visibility yellow with black numerals and 32 nds graduations.

Left Reading Measuring Tape reads from the zero
mark to the left as the measure increases.

These very accurate, self-stick steel measuring tapes mount directly to your fence and feature high visibility yellow with black numerals and 32 nd's graduations.

Right Reading Measuring Tape reads from the zero mark to the right as the measure increases.

Fits Delta Unifence, Biesemeyer Commercial and Home Shop Systems, Biesemeyer Universal Miter Systems and other Fence Systems.

• Left 1/2" English, 64ths
• Permanent adhesive
• Precision metal tape with adhesive backing
• Sticks to almost any work surface.
• Convenient at-a-glance measurements.
• Trim to fit you're applicat

Left Reading Measuring Tape reads from the zero mark to the left as the measure increases.

Fits Delta Unifence, Biesemeyer Commercial and Home Shop Systems, Biesemeyer Universal Miter Systems and other Fence Systems.

• Right 1/2" English, 64ths
• Permanent adhesive
• Precision metal tape with adhesive backing
• Sticks to almost any work surface.
• Convenient at-a-glance measurements.
• Trim to fit you're applicatio

Right Reading Measuring Tape reads from the zero mark to the right as the measure increases.