There are lots of fancy router plates on the market today and most cost $50.00 or more. Fits our router table top above and many other popular tops. Custom drill the size hole you need and for the price, you can have one for each router you have.

A lot of times, when you place your router plate with a router
attached to it into your table top, there is quite a bit of play
from side to side or back and forth. Our cam action side adjusters remedy this problem by applying Firm pressure to three points. The cam action side adjusters work because of an offset drill hole, which pushes the edge of the adjuster tight up against the router table opening when you rotate the adjuster clockwise. Includes three cam action side adjusters.
Note: Drilling and countersink of router plate is required for proper installation.

Deluxe  9" x 12" x 3/8" Router Plate

• 3/8" thick Phenol ic plate for the heaviest routers
  (up to 3-1/4hp)
• Snap out rings give openings of:
  3-7/8" for large raised panel cutters
  2-5/8" for medium to large cutters
  1-1/4" for small cutters and PORTER CABLE
  template guides.

Inverting your router in a router table allows for safer and more versatile operations. Our deluxe router table insert is made from high strength plastic. Large 9"x12"x3/8"(1/4" lip) design accommodates heavy routers.

Snap out rings allow for openings of 3-1/8", 2-5/8" & 1-1/4" for a closer match to your router bit. The deluxe router table insert includes a shoulder pin for freehand work and magnets to help hold the insert into your router table. Threaded Allen wrench inserts in each corner help you level and easily adjust the router insert with your table.

THE LAST ROUTER PLATE YOU WILL EVER BUY!

Precision machined .318" (approx.) thick aluminum plate for perfect flatness and no sag.

Inverting your router in a router table allows for safer and more versatile operations. Large 9 "x1 2" or 9-1/4" x 11-3/4" designs accommodates heavy routers.

Snap out rings allow for openings of 3-7/8", 2-5/8" & 1-1/4" for a closer match to your router bit. The Aluminum Router Plate includes a shoulder pin for freehand work and magnets to help hold the insert into your router table. Threaded Allen wrench inserts in each corner help you level and easily adjust the router insert with your table.

Unique cam action adjusters to insure a perfect in your router table opening. Router plate is pre-drilled for easy installation of cam action side adjusters.

Shoulder pin for easy hand work. The pin makes cuttings, styles, rails and miters a breeze.

Phenolic .318" (approx.) thick router plate .

Inverting your router in a router table allows for safer and more versatile operations. Large 9 "x 12" or 9-1/4" x 11-3/4" designs accommodates heavy routers.

Snap out rings allow for openings of 3-7/8", 2-5/8" & 1-1/4" for a closer match to your router bit. The Phenolic Router Plate includes a shoulder pin for freehand work and magnets to help hold the insert into your router table. Threaded Allen wrench inserts in each corner help you level and easily adjust the router insert with your table.

Unique cam action adjusters to insure a perfect in your router table opening. Router plate is pre-drilled for easy installation of cam action side adjusters.

Sholder pin for easy hand work. The pin makes cuttings, styles, rails and miters a breeze.

Router Base With Centering Pin

Pre-drilled for most any router, this plate also includes
a smartly designed centering pin that centers the guide to the router collet. Install a Porter-Cable style guide bushing
(not included), use the centering pin to line-up the base plate to the collet, install your bit for perfect alignment. Plate has a 1-3/16" dia. center hole that will accept our inlay or template guide kit.